How to Send ETH and ERC-20 Tokens Safely: Checklist
Sending crypto feels risky because a confirmed blockchain transaction cannot be reversed. No bank can call it back, and no support team can press undo. This guide shows you how to send ETH and ERC-20 tokens (like USDC) safely. It uses a short, repeatable routine that works in any wallet.
If you feel nervous right now, that caution is smart. You might be paying a friend, moving funds off an exchange, or following a tutorial under time pressure. Sending crypto works like mailing a letter in permanent ink. Once it's posted, there's no return to sender. So you check the envelope carefully before it goes in the box.
Pilots manage a similar risk with a pre-flight checklist that they use before every takeoff, however experienced they are. You'll learn the same kind of habit: 5 Pre-Flight Checks, which are Asset, Address, Network, Amount and Fee. By the end, you'll have sent a small $1โ$5 test transfer, tracked it on a block explorer, and learned how to repeat the process without a tutorial.
๐ What You'll Learn
- How sending ETH differs from sending ERC-20 tokens, and why both need ETH for gas
- The 5 Pre-Flight Checks (Asset, Address, Network, Amount, Fee), which you can run from memory
- Step-by-step sending from MetaMask, a Ledger or Trezor, an exchange, or a mobile wallet
- How to pick the right network: Ethereum mainnet or a Layer 2 like Arbitrum or Base
- How to read a gas fee estimate and lower your costs
- How to verify your transfer on Etherscan and fix stuck or failed transactions
- How to spot address poisoning, fake support and approval traps
โฑ๏ธ Estimated Time: 15โ20 minutes to read, plus about 10 minutes for your first test transaction
๐ Difficulty: Beginner (no coding needed)
Get ETH for gas, plus the recipient's address and network
Run the 5 Pre-Flight Checks
Send a small amount
Send the full amount
Track it on a block explorer
๐ก Tip: In a hurry? Read the 5 Pre-Flight Checks first, then jump to your sending method.
Before You Start
To follow this guide, you'll need:
- โ A wallet you control, or an exchange account that holds your crypto
- โ A small amount of ETH for gas on the network you're sending from
- โ The recipient's correct address and network, received through a trusted channel
- โ Your seed phrase backed up offline, so a broken device doesn't mean lost funds
- โ A few basic terms, which the glossary below explains in plain language
A Wallet You Control
A self-custody wallet is one where you hold the keys, so only you can move the funds. Popular options include MetaMask and Rabby (browser extensions), Trust Wallet and Rainbow (mobile apps), and Coinbase's self-custody wallet app. That app is separate from the Coinbase exchange. Hardware wallets like Ledger and Trezor keep your keys on a physical device.
An exchange account is different. The exchange holds the keys for you, and you send by making a withdrawal. Both are covered below. If you haven't set up a wallet yet, see our upcoming guides How to Set Up MetaMask and Hardware Wallet Setup Guide (coming soon).
ETH for Gas Fees
Gas is the fee you pay the network to process your transaction. On Ethereum, gas is always paid in ETH, including when you send a token like USDC. You need that ETH on the same network you're sending from.
Popular Layer 2 networks such as Arbitrum, Optimism and Base also use ETH for gas. Some other Ethereum-compatible chains don't. Polygon uses POL, BNB Chain uses BNB, and Avalanche's network uses its own token, AVAX. Keep a small buffer of the gas token, enough for several transfers, on every network you use. Our upcoming guide What Are Gas Fees? (coming soon) goes deeper.
The Recipient's Correct Address AND Network
Asking for an address isn't enough. Ask for the network too. You can copy this question: "Which address, and which network, should I send to?"
- Get the address directly from the recipient through a trusted channel, such as an in-person message or a verified chat.
- Never copy an address from your own transaction history. Scammers plant lookalike addresses there.
- For exchange deposits, open the exchange's Deposit page, select the asset and network first, and then copy the address it shows.
Your Seed Phrase Backed Up Offline
Your seed phrase is the 12- or 24-word backup that restores your wallet. Before moving real money, make sure it's written down offline and stored somewhere safe. If your phone or laptop fails mid-transfer, the seed phrase lets you recover. No legitimate person or company will ever ask you for it. See How to Back Up Your Seed Phrase (coming soon).
Basic Concepts: A Quick Glossary
- Wallet address: Your public receiving address. It starts with
0xfollowed by a long string of letters and numbers. Mixed upper- and lowercase letters act as a built-in typo check called a checksum, defined in EIP-55. - ETH: Ethereum's native coin. It pays for every action on the network.
- ERC-20: The standard most Ethereum tokens follow, such as USDC, USDT and LINK.
- Gas: Units that measure how much computing work your transaction needs.
- Gwei: A tiny fraction of an ETH, used to quote the price of each gas unit.
- Network (chain): A specific blockchain, such as Ethereum mainnet, Arbitrum or Base.
- Block explorer: A public search engine for transactions. Etherscan is the best known.
- Transaction hash: A unique ID for your transaction, starting with
0x. It's your tracking number. - Nonce: The sequence number of each transaction from your address. It matters for troubleshooting.
With the basics ready, the next step is the question beginners ask most often: why does sending a token cost ETH?
ETH vs ERC-20 Tokens: What Changes When You Send?
Gas works like a toll road. ETH is the toll for using the highway, even when your cargo is USDC. Once that makes sense, most "my token won't send" problems disappear.
ETH Is the Native Coin (and It Pays for Gas)
ETH is built into Ethereum itself. Ethereum has run on proof-of-stake since 2022. In that system, validators (computers that stake ETH to secure the network) bundle transactions into blocks. Every action you take, from a simple send to a token swap, is paid for in ETH.
ERC-20 Tokens Live Inside Smart Contracts
A token balance isn't stored in your wallet like a coin in a pocket. It's an entry in a ledger kept by the token's smart contract, a program running on Ethereum. "Sending USDC" really means asking the USDC contract to update its records. That takes more computing work than a plain ETH transfer, so it uses more gas units. A simple ETH send uses a small, fixed amount of gas. Token sends need noticeably more, and the exact amount depends on the token's contract. For the technical details, see the ERC-20 standard on ethereum.org.
Same Address, Many Networks
Your 0x address works like the same street address in different cities. It's valid on Ethereum, Arbitrum, Optimism, Base and Polygon, but each network keeps its own separate balances. USDC on Base won't appear while your wallet is set to Ethereum. The same token can also have a different contract address on each chain. Learn more on ethereum.org's Layer 2 page, compare networks on L2BEAT, or read our upcoming What Is Layer 2? guide (coming soon).
| Sending ETH | Sending an ERC-20 Token | |
|---|---|---|
| What pays gas | ETH | ETH (not the token) |
| Gas units used | Small, fixed amount | More; varies by token contract |
| Where the balance lives | Directly on your address | In the token contract's ledger |
| Common mistake | Sending all ETH and leaving none for gas | Holding tokens but no ETH; picking a fake token |
| Where to check on Etherscan | The "Value" field | The "ERC-20 Tokens Transferred" line |
The 5 Pre-Flight Checks: How to Send ETH Without Second-Guessing
Pilots tick off a checklist before every takeoff. You'll do the same before every Send. Wallet screens get redesigned and buttons move, but these five checks stay the same. Each one below gives you the question to ask, how to verify it, what can go wrong, and what a pass looks like.
Check 1: Asset. Is This the Real Token?
Fake tokens can copy any name and symbol, including "USDC". To verify a token, compare its contract address with the one listed on the issuer's official website, or with its page on Etherscan or CoinGecko.
โ ๏ธ What goes wrong: A token appears in your wallet that you never bought. That's usually an unsolicited "airdrop" from scammers. Ignore it.
โ Pass: The token's contract address matches the official source.
Check 2: Address. Does Every Part Match?
Compare the first 6 AND last 6 characters of the pasted address with the source, and ideally a few in the middle too. Never type an address by hand, and never copy one from your transaction history. If you use an ENS name (a readable name like alice.eth that points to an address), confirm with the recipient which address it resolves to. The ENS documentation explains how names resolve.
โ ๏ธ What goes wrong: A lookalike address shares the same start and end but differs in the middle.
โ Pass: Start, middle and end all match the trusted source.
Check 3: Network. Does the Receiver Support This Chain?
Remember: right street, wrong city. Check that you're sending on the network the recipient expects. This matters most for exchange deposits. The network you send on must exactly match the network shown on the exchange's deposit page.
โ ๏ธ What goes wrong: You send USDC on Base to an exchange that only accepts USDC on Ethereum.
โ Pass: The recipient has confirmed the network by name.
Check 4: Amount. Is the Decimal in the Right Place?
Leave some ETH behind for gas. Don't click "Max" on ETH unless your wallet subtracts the fee for you. Check the decimal point carefully. For stablecoins, confirm the dollar value shown.
Hypothetical example: Suppose you intend to send 0.1 ETH but type 1.0 ETH. The difference is 1.0 รท 0.1 = 10, so you'd send ten times what you meant. These figures are illustrative only.
โ Pass: The amount, decimal and dollar value all look right, and some ETH remains for gas.
Check 5: Fee. Is the Gas Estimate Reasonable?
Read the estimated fee in dollars. Ask yourself whether it's normal for this network. Layer 2 fees are usually much lower than Ethereum mainnet fees.
โ ๏ธ What goes wrong: A simple transfer shows an unusually large fee. That can mean network congestion, the wrong network, or that you're signing something other than a simple send. Stop and investigate.
โ Pass: The fee is in line with the current rate on a gas tracker.
Your Printable Pre-Flight Checklist
โ๏ธ PRE-FLIGHT CHECKLIST: Run before every Send
- โ Asset: Correct token? Contract matches the official source?
- โ Address: First 6, middle and last 6 characters match?
- โ Network: Recipient confirmed this exact chain?
- โ Amount: Decimal correct? ETH left for gas?
- โ Fee: Reasonable for this network right now?
- โ Bonus: Test first? New address, new network or large amount means yes.
Print this or save a screenshot. Use it every time.
Step-by-Step: Send ETH and ERC-20 Tokens Safely
There are four main ways to send ETH and tokens. Choose the one that matches where your crypto lives. Each path repeats a short 5-check reminder at the moment of sending, so you're covered even if you skipped ahead.
๐ป Option A: Software Wallet (MetaMask / Rabby)
Best for: Everyday transfers and using apps
Choose this if: Your crypto is in a browser extension wallet.
Cost: Free (you pay network gas only)
๐ Option B: Hardware Wallet (Ledger / Trezor)
Best for: Savings and large transfers
Choose this if: Your keys are on a physical device.
Cost: $ (device purchase, plus network gas)
๐ฆ Option C: Exchange (Coinbase / Kraken / Binance)
Best for: Moving funds off an exchange
Choose this if: Your crypto is on an exchange and you want it in your own wallet.
Cost: The exchange's withdrawal fee
๐ฑ Option D: Mobile Wallet (Trust / Coinbase Wallet / Rainbow)
Best for: Quick payments to friends
Choose this if: Your wallet lives on your phone.
Cost: Free (you pay network gas only)
Still undecided? See the comparison table near the end.
Option A: Send ETH from MetaMask, Step by Step
MetaMask updates its interface regularly, so button names may differ slightly from what you see here. The 5 checks never change. For the latest screens, see MetaMask Support.
- Step 1: Unlock MetaMask - Click the MetaMask icon in your browser toolbar and enter your password. You should see your account balance.
- Step 2: Select the correct network - Open the network menu (usually at the top of the wallet) and choose the network the recipient confirmed, for example Ethereum Mainnet. Your balance updates to show funds on that network.
- Step 3: Click "Send" - A recipient field appears.
- Step 4: Paste the recipient address or ENS name - Paste it, then compare the first 6 and last 6 characters with the original source. MetaMask may warn you if the address is new or looks suspicious. Read any warning carefully.
- Step 5: Choose ETH as the asset - In the asset selector, pick ETH.
- Step 6: Enter the amount - Type a small test amount first, such as $1โ$5 worth. The dollar value should appear beneath it.
- Step 7: Review the gas fee - MetaMask usually offers speed options such as Low, Market and Aggressive, plus an Advanced setting. Market is fine for most transfers.
- Step 8: Run the 5 checks, then click "Confirm" - Use the box below. After confirming, the transaction appears as pending in your Activity tab.
- Step 9: Track it - Click the transaction in the Activity tab and choose "View on block explorer". Etherscan opens and shows its status.
โ Before Confirm: Asset โ Address โ Network โ Amount โ Fee โ
Using Rabby instead? The flow is very similar. Rabby also shows a simulation of how your balances will change before you sign. That gives you a useful extra check.
Sending an ERC-20 Token (Like USDC) from MetaMask
Follow the same steps, but select the token instead of ETH in Step 5. If the token doesn't appear, import it using its verified contract address. Get that address from the issuer's official site or from Etherscan, never from a link in a DM. You still need ETH in the same account and on the same network to pay gas.
Sending on a Layer 2 (Arbitrum, Base, Optimism) Instead
A Layer 2 is a network built on top of Ethereum that processes transactions more cheaply. In Step 2, switch to that network, and make sure you hold ETH there for gas. Fees are usually far lower than on mainnet. Confirm the recipient expects funds on that same Layer 2. If the network isn't listed, add it from a trusted source such as the network's official documentation or Chainlist.
Using a physical device instead? The next path adds one powerful safety step.
Option B: Send ETH with a Hardware Wallet (Ledger or Trezor), Step by Step
A hardware wallet's screen works like a bank vault's teller window. Your computer might show anything, but the device screen shows the true destination and amount. Official instructions are on Ledger Support and Trezor Support.
- Step 1: Connect and unlock - Plug in the device (or pair it over Bluetooth if supported) and enter your PIN on the device.
- Step 2: Open the Ethereum app (Ledger only) - On a Ledger, open the Ethereum app on the device. Trezor users can skip this step.
- Step 3: Select your account - In Ledger's companion app (Ledger Live) or Trezor Suite, choose your Ethereum account, or the token inside it.
- Step 4: Click "Send" - Paste the recipient address and compare its first and last 6 characters with the source.
- Step 5: Enter the amount and fee level - Start with a small test amount. Pick a standard fee unless the transfer is urgent.
- Step 6: Review the summary on your computer - Check the asset, amount, network and fee.
- Step 7: Verify on the device screen - Check the address character by character against the source, then the amount, network and fee.
- Step 8: Approve on the device - Press the buttons or tap the screen to sign. The app shows the transaction as sent.
- Step 9: Track it - Copy the transaction hash from the app's history and paste it into Etherscan.
โ Before you approve on the device: Asset โ Address (on the device screen) โ Network โ Amount โ Fee โ
Using a Hardware Wallet Through MetaMask or Rabby
You can connect a Ledger or Trezor to MetaMask or Rabby as a hardware account. Then follow the Option A steps. The difference is the final approval, which happens on the device.
Blind signing means approving data that your device can't display in readable form. You shouldn't need it for a simple ETH send. If your device asks you to enable blind signing for a basic transfer, stop and investigate before continuing.
Why the Device Screen Is Your Source of Truth
Clipboard malware or a compromised browser can change the address your computer displays. It can't change what the hardware wallet shows on its own screen. The rule is simple: if the device screen doesn't match the address you intended, reject the transaction.
Many beginners start on an exchange, and that path has one step where most mistakes happen.
Option C: Withdraw ETH or Tokens from an Exchange, Step by Step
โ ๏ธ Network selection is the most important step on an exchange. If you choose "Ethereum (ERC-20)" when the destination expects Base or Arbitrum, or the other way around, you can lose access to your funds. Confirm the network before you paste anything.
- Step 1: Log in safely - Use your bookmarked exchange URL, not a search result or email link.
- Step 2: Open Withdraw or Send - It's usually on the Assets, Wallet or Portfolio page.
- Step 3: Choose the asset - Select ETH or the token, such as USDC.
- Step 4: Choose the network - Pick the network that matches what the recipient's wallet or deposit page expects. The exchange lists the available networks by name.
- Step 5: Paste the destination address - Compare the first and last 6 characters with the source.
- Step 6: Save it to your address book or whitelist - Do this if the exchange offers it. It makes future sends safer.
- Step 7: Enter the amount - Note the withdrawal fee shown, and the amount the recipient will actually receive.
- Step 8: Complete 2FA - Enter the code from your authenticator app or security key.
- Step 9: Confirm via email or app prompt - Some exchanges require this extra approval.
- Step 10: Track it - Open your withdrawal history, copy the transaction hash, and check it on Etherscan or the matching Layer 2 explorer.
โ Before you submit: Asset โ Address โ Network (matches the destination exactly) โ Amount โ Fee โ
About memos and tags: A memo or destination tag is generally not needed for ETH or ERC-20 sends to a personal wallet. If a receiving exchange's deposit page shows a memo, follow its instructions exactly. For exchange-specific guidance, see the Coinbase Help Center and Kraken Support.
Exchange Withdrawal Fees vs Gas Fees
Exchanges often charge their own withdrawal fee, which covers the gas they pay for you. It can be higher or lower than the live on-chain fee, and it usually varies by network. Withdrawing to a Layer 2 is often cheaper than withdrawing to Ethereum mainnet, as long as your destination supports that network.
Whitelisting Addresses for Extra Protection
A whitelist only allows withdrawals to addresses you've approved in advance. Exchanges call it different things: allowlist, whitelist or address book. Some also add a waiting period before a newly added address can receive funds. That delay protects you if someone takes over your account.
Option D: Send from a Mobile Wallet (Trust Wallet, Coinbase Wallet, Rainbow), Step by Step
- Step 1: Unlock the app - Use your PIN or biometrics (fingerprint or face).
- Step 2: Select the asset AND check its network - Mobile wallets often label assets with their network, such as "USDC ยท Base". Make sure it's the network the recipient expects.
- Step 3: Tap "Send"
- Step 4: Paste the address or scan a QR code - Scan only codes the recipient shows you directly.
- Step 5: Compare the address - Check the first and last 6 characters, even after scanning.
- Step 6: Enter the amount - Use a test amount first.
- Step 7: Review the network fee - It appears on the confirmation screen.
- Step 8: Confirm - Approve with your PIN or biometrics.
- Step 9: Open it in the explorer - Tap the transaction in your history to view it on a block explorer.
โ Before Confirm: Asset โ Address โ Network โ Amount โ Fee โ
QR code and app safety: Be wary of QR codes in emails, flyers or DMs. Install wallets only from official app store listings, and check the developer name, because copycat apps exist.
Whichever path you chose, one habit protects you more than any other.
Always Send a Test Transaction First
Bands do a sound check before every concert. A test transaction works the same way. Send a little, confirm it arrives, and only then send the rest.
Hypothetical example: Suppose you plan to send $1,000 of USDC, and the extra test send costs $2 in fees. The cost of that insurance is 2 รท 1,000 = 0.002, or 0.2% of the transfer. These numbers are illustrative. Check live fees on the Etherscan Gas Tracker, and expect Layer 2 tests to cost far less than mainnet tests.
A test is essential for: the first send to any new address, every first deposit to an exchange, any new network, and any large amount.
A test is optional for: repeat sends to an address you've already verified and saved in your address book.
How to do it: Send $1โ$5 worth. Ask the recipient to confirm it arrived, or check the exchange's deposit history. Then send the remainder.
โ ๏ธ After your test, scammers may plant lookalike addresses in your history. For the main send, copy the address from the original source again, not from your recent activity.
๐ Your move: Send a $1 test now. Run the 5 checks, then come back and verify it on Etherscan using the section below.
Understanding Gas Fees (Without the Headache)
You don't need to do any math to send safely. You just need to read a fee estimate with confidence. For the full technical picture, see ethereum.org's gas and fees page.
What Gas Actually Is
Gas measures how much computing work your transaction needs. The fee equals gas units multiplied by the price per unit, quoted in gwei. On a toll road, a heavier load (a token transfer) uses more road, and rush hour raises the price.
Hypothetical example: Suppose a token transfer uses 50,000 gas units and the price is 10 gwei per unit. Fee = 50,000 ร 10 = 500,000 gwei. Your wallet converts this into ETH and dollars for you. These figures are illustrative, not current rates.
Base Fee + Priority Fee Explained (EIP-1559)
Ethereum's fee system comes from EIP-1559. It has two parts:
- Base fee: Set by network demand. It is designed to be burned, which means permanently removed from circulation. It works like the fixed toll.
- Priority fee (tip): According to ethereum.org, you define the amount you're prepared to pay as a tip to a validator to encourage them to include your transaction in a block. The tip helps you get through faster.
You also approve a max fee. That's a cap, so you won't pay more than the limit you set.
How to Save on Gas
- Send during quieter periods. Check the Etherscan Gas Tracker first.
- Use a Layer 2 when the recipient supports it.
- Skip "Aggressive" settings unless the transfer is urgent.
- Group several small payments into fewer transfers when you can.
Why Your Fee Estimate Changes
Demand shifts from block to block. That's why the same transfer can cost much more one day than the next. Estimates can even change between opening the screen and clicking Confirm, so always recheck the fee right before you confirm.
Once you've clicked Confirm, the next question is whether it worked.
How to Verify Your Transaction on Etherscan
A block explorer works like a package tracking page. Your transaction hash is the tracking number. Pending means in transit, Success means delivered, and Failed means returned, but the postage is spent.
Use the explorer that matches the network: Etherscan for Ethereum, Arbiscan for Arbitrum, Basescan for Base, and Optimistic Etherscan for Optimism. The Etherscan knowledge base explains each field. The key fields are Status, Block, From, To, Value, Transaction Fee and, for tokens, ERC-20 Tokens Transferred.
Finding Your Transaction Hash
In your wallet's activity tab, select the transaction and choose "View on block explorer". You can also copy the hash, which starts with 0x. On an exchange, look in your withdrawal history. Another option is to paste your own address into Etherscan's search bar to see all your recent activity.
Reading the Status: Pending, Success, Failed
Ethereum produces a new block every 12 seconds. A transfer with a reasonable fee usually confirms quickly, often within a few blocks. Layer 2s are often faster. Exchanges may wait for extra confirmations before crediting a deposit, so a short delay there is normal.
Checking Token Transfers
For token sends, the "To" field shows the token's contract, and "Value" may show 0 ETH. That's normal, and your tokens are not lost. The real recipient and amount appear under "ERC-20 Tokens Transferred".
What "Failed" Means
A failed transaction didn't move your funds. They stay in your wallet, but the gas used is still spent. Common causes are a gas limit set too low, an insufficient token balance, or restrictions in the token contract. Fix the cause and resend.
Troubleshooting: Stuck, Pending or Failed Transactions
Take a breath. Most "stuck" transactions aren't lost. They're waiting. Every transaction from your address has a nonce, a sequence number. A stuck transaction blocks the ones queued behind it until it clears. MetaMask Support covers the speed-up and cancel options in detail.
Speed Up a Pending Transaction
Use your wallet's "Speed Up" option. It resubmits the same transaction, with the same nonce, at a higher fee. Only one version gets included in a block, so you only pay for that one.
Cancel a Transaction
"Cancel" sends a replacement transaction of 0 ETH to yourself, using the same nonce and a higher fee. It only works while the original is still pending. It isn't guaranteed if the original gets included first. Once a transaction is confirmed, nothing can cancel it.
"Insufficient Funds for Gas"
You need ETH, or that chain's gas token, on that specific network. To fix it, buy ETH on that network, send some there from another wallet, or bridge it from another network. See How to Bridge to Layer 2 (coming soon).
I Sent on the Wrong Network. What Now?
- Case A, your own self-custody wallet: The funds are usually safe. Switch your wallet to that network and the balance appears. You'll need gas on that network to move it.
- Case B, an exchange deposit on an unsupported network: Contact the exchange only through its official help center. Some exchanges can recover funds, sometimes for a fee, but recovery isn't guaranteed.
- Case C, a smart-contract wallet (such as a multisig): It may not exist on the other network. Get expert help through official channels.
I Sent to the Wrong Address
The honest answer is that this is usually unrecoverable. There are still things to try:
- If the address belongs to someone you know, contact them.
- If it belongs to an exchange, contact that exchange's official support with the transaction hash.
- If it was theft, report it to the FBI's IC3 (US) or your local authorities.
โ ๏ธ "Recovery services" that contact you first are almost always scams. The FTC's crypto scam guidance explains the warning signs.
โ ๏ธ Common Mistakes to Avoid
These mistakes happen to experienced users too. Each one has a simple fix.
- 1. Choosing the wrong network. Fix: Run Check 3 and ask the recipient which network to use.
- 2. Having no ETH for gas. Fix: Keep a small buffer on every network you use.
- 3. Copying an address from transaction history. Fix: Always copy from the original, trusted source.
- 4. Sending tokens to the token's own contract address. Fix: Paste the recipient's wallet address, never a contract address.
- 5. Skipping the test transaction. Fix: Always test new addresses, new networks and exchanges.
- 6. Trusting "support" DMs. Fix: Real support never messages you first or asks for your seed phrase.
- 7. Interacting with fake token airdrops. Fix: Hide unknown tokens and never visit their "claim" sites.
- 8. Sending a token an exchange doesn't support. Fix: Check the exchange's supported assets and networks first.
- 9. Typing an address by hand. Fix: Copy and paste or scan a QR code, then verify.
- 10. Clicking "Approve" when you meant "Send". Fix: Read the wallet prompt. A simple send never asks for spending permission.
Security Best Practices for Sending Crypto
Most losses come from a handful of known scams. Here's how each one works, and the specific defense against it.
Defend Against Address Poisoning
Address poisoning works like a lookalike house. A scammer creates an address with the same first and last characters as one you use. They send you a tiny or zero-value transfer from it, so it appears in your history. They're hoping you'll copy it next time. Etherscan flags some of these, as described in the Etherscan knowledge base.
โ Defense: Use an address book, compare middle characters too, and never copy from your activity list.
Beware Clipboard Hijacking Malware
This malware quietly swaps the address you copied for the attacker's address when you paste it.
โ Defense: Check the address after pasting. Keep your operating system and browser updated, and avoid pirated software. Verify on a hardware wallet screen when you can.
Use Bookmarks, Not Search Ads, for Wallet and Exchange Sites
Fake sites sometimes buy search ads that appear above the real site.
โ Defense: Bookmark official URLs. Install wallet extensions only through links on the official website.
Never Share Your Seed Phrase
No legitimate support agent, exchange or wallet will ever ask for your seed phrase. Anyone who asks is attempting theft.
โ Defense: Keep it offline, and never type it into a website or chat. Learn more in What Is a Seed Phrase? (coming soon).
Know What You're Signing: Send vs Approve vs Permit
- Send moves funds once.
- Approve gives a contract ongoing permission to spend your tokens.
- Permit is an off-chain signature, meaning it isn't broadcast as a transaction. It can grant the same permission without any gas fee. A "free signature" can still be dangerous.
โ Defense: Read every prompt. Revoke old permissions you no longer use. See How to Revoke Token Approvals (coming soon).
Use an Address Book or Whitelist
โ Defense: Save verified addresses in your wallet's contacts, and turn on withdrawal allowlists at your exchange.
Consider a Hardware Wallet for Larger Amounts
A simple rule of thumb: if losing it would really hurt, protect it with a hardware wallet. On-device verification protects you even when your computer is compromised. Compare options in Best Hardware Wallets (coming soon).
Comparison: Which Sending Method Is Right for You?
| Software Wallet | Hardware Wallet | Exchange | Mobile Wallet | |
|---|---|---|---|---|
| Security | Medium | High | Depends on the exchange (custodial) | Medium |
| Convenience | High | Medium | High | Very high |
| Fees | Network gas | Network gas | Exchange withdrawal fee | Network gas |
| Best for | Everyday transfers and apps | Savings and large transfers | Moving funds off an exchange | Quick payments to friends |
| Beginner-friendliness | โ โ โ โ | โ โ โ | โ โ โ โ โ | โ โ โ โ โ |
| Main risk | Malware and phishing | Losing the device without a seed backup | Wrong network, account takeover | Fake apps, QR scams |
Many beginners combine methods. A common setup is an exchange to buy, a mobile or software wallet for small amounts, and a hardware wallet for savings. Whichever you use, the 5 Pre-Flight Checks apply to every column.
Frequently Asked Questions
How do I send ETH to someone?
Ask the recipient for their address and network. Open your wallet, select that network, and click Send. Paste the address, choose ETH, and enter a small test amount. Run the 5 Pre-Flight Checks (Asset, Address, Network, Amount, Fee), then confirm. Once the recipient confirms the test arrived, send the rest and track it on Etherscan.
Why do I need ETH to send USDT or USDC?
Every action on Ethereum is paid for in ETH, including token transfers. USDT and USDC are ERC-20 tokens that live inside smart contracts. Sending them asks the contract to update its records, and that work costs gas paid in ETH. You need ETH on the same network as the token, such as Ethereum mainnet or Base.
How long does an ETH transfer take?
Ethereum produces a new block every 12 seconds, so a transfer with a reasonable fee usually confirms quickly. Layer 2 networks are often faster. Low fees during busy periods can cause delays. Exchanges may also wait for extra confirmations before crediting a deposit, so allow some extra time when sending to one.
How much does it cost to send ETH?
The cost depends on network demand and which network you use. Fees change from block to block, and Layer 2 networks are usually much cheaper than Ethereum mainnet. Token transfers cost more than plain ETH sends because they use more gas. Check live rates on the Etherscan Gas Tracker before sending, and read your wallet's estimate.
Can I cancel an ETH transaction?
Only while it's still pending. Your wallet's Cancel option sends a 0 ETH replacement to yourself with the same nonce and a higher fee. It isn't guaranteed if the original transaction gets included first. Once a transaction is confirmed, it cannot be cancelled or reversed by anyone.
What happens if I send ETH to the wrong address?
It's usually unrecoverable, because blockchain transactions can't be reversed. If you know the owner, contact them. If it's an exchange address, contact that exchange's official support with your transaction hash. Report theft to the FBI's IC3 or your local authorities. Ignore any "recovery service" that contacts you, since these are almost always scams.
Can I send ETH to a Bitcoin address?
No. Bitcoin and Ethereum are separate blockchains with different address formats, and Ethereum wallets should reject a Bitcoin address. The same applies to non-EVM networks like Sui, which has its own native token, SUI. To move value between chains, use an exchange or a reputable bridge, and always confirm the destination network first.
What's the difference between sending on Ethereum and on Arbitrum or Base?
Arbitrum and Base are Layer 2 networks built on top of Ethereum. Your address is the same on all of them, but the balances are separate. Layer 2 fees are usually much lower, and gas is still paid in ETH. The recipient must expect funds on that exact network, or they won't see them where they look.
Do I need a memo or tag to send ETH?
Usually not. A memo or destination tag is generally not needed for ETH or ERC-20 sends to a personal wallet. If a receiving exchange's deposit page shows a memo field, follow its instructions exactly. When in doubt, check that exchange's official help center before sending.
Is it safe to send ETH using an ENS name?
Yes, if you verify it. An ENS name like alice.eth points to an address, and lookalike names can exist. Confirm the exact spelling with the recipient, and compare the address your wallet resolves it to with the one they expect. A small test transaction adds another layer of safety.
Why does my transaction say "Failed" but I still paid a fee?
Validators did the computing work before the transaction failed, so the gas used is still charged. Your funds didn't move and remain in your wallet. Common causes are a gas limit set too low, an insufficient token balance, or contract restrictions. Fix the cause, then resend.
How do I send ETH from Coinbase to MetaMask?
In MetaMask, choose the network you want, then copy your address. In Coinbase, go to Send or Withdraw, choose ETH, and select the same network. Paste your MetaMask address, check the first and last 6 characters, and complete 2FA. Send a small test first, then switch MetaMask to that network to see the balance.
What's Next?
You now know how to send ETH and ERC-20 tokens with a routine instead of a gamble. Run the 5 Pre-Flight Checks, test first, and verify on the explorer. Do your $1 test send now, then bookmark this checklist for next time.
Now that you've completed this guide, you might want to explore these upcoming guides:
๐ก๏ธ Stay safe
- How to Spot Crypto Scams (coming soon)
- How to Revoke Token Approvals (coming soon)
- What Is a Seed Phrase? (coming soon)
๐ธ Go cheaper
- What Is Layer 2? (coming soon)
- How to Bridge to Layer 2 (coming soon)
- Gas Fees Explained (coming soon)
๐ Go deeper
- How to Use Etherscan (coming soon)
- What Is an ENS Name? (coming soon)
- Best Hardware Wallets (coming soon)
- How to Receive ETH (coming soon)
- How to Buy ETH (coming soon)
- How to Set Up MetaMask (coming soon)
Sources
- Ethereum โ primary documentation
- Ethereum โ official documentation site
- Decentralized Lending โ primary documentation
- Ethereum โ primary documentation
- Ethereum โ primary documentation
- Avalanche โ primary documentation
- Avalanche โ primary documentation
- Avalanche โ primary documentation
- Suilend โ official documentation site
- Sui โ official documentation site
- Avalanche โ primary documentation
- DefiLlama โ Canton
- CoinGecko โ Canton
- Ethereum Smart Contracts Documentation
- Avalanche โ official documentation site
- Decentralized Lending โ primary documentation
- DeFiLlama: Lending Protocols
- Ethereum โ primary documentation
- Ethereum โ primary documentation
- Canton โ official documentation site